Video |
Input Signal Types |
HDMI® (DVI and Dual-Mode DisplayPort™ interface compatible5) and DM® Essentials with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2 |
Output Signal Type |
HDMI® (DVI compatible5) with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support2 |
Copy Protection |
HDCP 2.3 |
Resolutions |
Common resolutions are listed in the following table. |
Progressive |
4096x2160 DCI 4K & 3840x2160 4K UHD |
24 Hz |
4:4:4 |
12 bit |
30 Hz |
4:4:4 |
12 bit |
60 Hz |
4:2:2 |
12 bit |
60 Hz |
4:4:4 |
8 bit |
2560x1600 WQXGA |
60 Hz |
4:4:4 |
8 bit |
1920x1080 FHD 1080p |
60 Hz |
4:4:4 |
12 bit |
Interlaced (HDMI input only) |
1920x1080 HD 1080i |
30 Hz |
4:4:4 |
12 bit |
Note: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz. |
|
Audio |
Input Signal Type |
HDMI, DM Essentials |
Output Signal Type |
HDMI |
Digital Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels |
Communications |
HDMI |
HDCP 2.3, EDID, CEC pass-through |
DM Essentials |
HDCP 2.3, EDID pass-through;
USB 2.0 up to 300 Mbps
|
USB |
USB signal extension via USB 2.0 host ports;
USB host for one TT-100 series cable caddy (sold separately) via SERVICE port |
Ethernet |
100/1000 Mbps, autoswitching, autonegotiating, autodiscovery, full/half duplex, DHCP, Web browser setup and control, Crestron control system integration, IEEE 802.1X, Secure CIP, Authentication, SSH/SSL, TLS |
Connectors |
HDMI OUTPUT 1‑2 |
(2) HDMI Type A connectors, female;
HDMI digital video/audio outputs;
DVI compatible5 |
HDMI INPUT 1 |
(1) HDMI Type Aconnector, female;
HDMI digital video/audio input;
DVI and Dual-Mode DisplayPort interface compatible5 |
DEVICE INPUT 1 |
(1) USB Type-C® connector, female;
USB 2.0 device port associated with HDMI input for AV sources that require USB 2.0 support;
USB signal extender port for connection to a computer or other USB 2.0 host3 |
DM IN 2 |
(1) 8‑pin RJ‑45 yellow connector, female, shielded;
DM Essentials input port for connection to the DM Essentials output port of a DM Essentials transmitter or DMPS Essentials switcher1 |
LAN |
(1) 8-pin RJ‑45 connector, female;
100BASE-TX/1000BASE-T Ethernet port for device configuration and management |
24V 1.9A |
(1) 2.1 x 5.5 mm DC power connector;
24VDC power input;
PW-2420RU power pack included4 |
HOST |
(2) USB Type-A connectors, female;
USB 2.0 host ports;
USB signal extender ports for connection to USB mice, keyboards, or other USB 2.0 peripheral devices;3
Available Power: 500 mA @ 5VDC per port
|
SERVICE |
(1) USB 2.0 Type‑A connector, female;
Used for firmware loading and configuration management;
Can also provide up to 5V 500 mA power to a USB powered device
|
Ground |
(1) Chassis ground lug |
Controls and Indicators |
PWR
|
(1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational. |
AUTO |
(1) Push button for enabling or disabling automatic switching of inputs;
(1) LED, green indicates that automatic switching of inputs is enabled |
SETUP |
(1) Push button for Ethernet setup;
(1) LED, red indicates that the SETUP push button is pressed |
INPUT 1 |
(1) Push button for manual selection of HDMI input;
(1) LED, green indicates that the HDMI input is routed to an output, and amber indicates that a source is detected but is not routed to an output |
INPUT 2 |
(1) Push button for manual selection of DM Essentials input;
(1) LED, green indicates that the DM Essentials input is routed to an output, and amber indicates that a source is detected but is not routed to an output |
OUTPUT 1 |
(1) Push button for manual selection of HDMI output 1;
(1) bicolor green/amber LED;
Green indicates that a display or other destination device is detected and HDMI output 1 is transmitting video;
Amber indicates that a display or other destination device is detected but no video is routed to the output |
OUTPUT 2 |
(1) Push button for manual selection of HDMI output 2;
(1) bicolor green/amber LED;
Green indicates that a display or other destination device is detected and HDMI output 2 is transmitting video;
Amber indicates that a display or other destination device is detected but no video is routed to the output |
DM IN 2 |
(2) LEDs on RJ-45 connector;
Green indicates that a DM Essentials link is established;
Flashing amber indicates non-HDCP video;
Solid amber indicates HDCP video |
LAN |
(2) LEDs on RJ-45 connector;
Green indicates that a 100 Mbps link is established;
Solid amber indicates that a 1000 Mbps link is established;
Flashing amber indicates 1000 Mbps Ethernet activity |
Power |
Power Pack (Included) |
Input: 100-240VAC
Output: 24VDC 1.3A
Model: PW-2420RU4
|
Environmental |
Environmental |
Temperature |
32° to 104°F (0° to 40°C) |
Humidity |
20% to 90% RH (noncondensing) |
Enclosure |
Chassis |
Metal, black finish, vented top and sides, 2 mounting brackets included |
Mounting |
Freestanding, surface mountable, or attachment to a single rack rail |
Dimensions |
Height |
1.2 in. (30 mm) |
Width |
8.52 in. (216 mm) |
Depth |
6.48 in. (165 mm) |
Weight |
1.95 lb (0.88 kg) |
Compliance |
Regulatory Model: M202047008
Intertek® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
To search for product certificates, refer to support.crestron.com/app/certificates.
|
Maximum DM Essentials Transmission Distance |
Resolution |
Frame Rate (Hz) |
Color Sampling |
Color Depth |
Cable Type1 |
1920x1080 HD 1080i |
30 |
4:4:4 |
12 bit |
230 ft (70 m) |
195 ft (60 m) |
1920x1080 FHD 1080p |
60 |
4:4:4 |
8, 12 bit |
1600x1200 UXGA |
60 |
4:4:4 |
8, 12 bit |
2048x1080 DCI 2K |
60 |
4:4:4 |
8, 12 bit |
1920x1200 WUXGA |
60 |
4:4:4 |
8, 12 bit |
2048x1152 QWXGA |
60 |
4:4:4 |
8, 12 bit |
2560x1080 UWFHD |
60 |
4:4:4 |
8 bit |
2560x1440 WQHD Reduced Blanking |
60 |
4:4:4 |
8 bit |
2560x1600 WQXGA Reduced Blanking |
60 |
4:4:4 |
8 bit |
2048x1152 QWXGA |
60 |
4:4:4 |
12 bit |
3840x2160 4K UHD and 4096x2160 DCI 4K |
30 |
4:2:2 |
12 bit |
30 |
4:4:4 |
8 bit |
60 |
4:2:0 |
8 bit |
3840x2160 4K UHD and 4096x2160 DCI 4K |
30 |
4:4:4 |
12 bit |
130 ft (40 m) |
100 ft (30 m) |
60 |
4:2:0 |
12 bit |
60 |
4:2:2 |
12 bit |
60 |
4:4:4 |
8 bit |
|