2-Channel HDBaseT® Certified 4K DigitalMedia 8G+® Output Card for DM® Switchers
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
For a replacement, please see:
DMC-4K-CO-HD-HDCP2.
A modular output card for DM-MD8X8, DM-MD16X16, or DM-MD32X32 switchers. Provides two independent 4K DM 8G+® outputs, plus one HDMI® output in parallel with the first DM 8G+ output.
NOTE: The latest version of the DMC-4K-CO-HD is model DMC-4K-CO-HD-HDCP2, which is an updated version of the original DMC-4K-CO-HD that adds support for HDCP 2.2. The original DMC-4K-CO-HD supports HDCP 1.1.
The DMC-4K-CO-HD is an output card designed for use with any card-based Crestron® DigitalMedia™ Switcher. It provides two independent DM 8G+® outputs, plus one HDMI® output. The HDMI output carries the same signal as the first DM 8G+ output. Both DM 8G+ outputs are compatible with HDBaseT®. Each DM 8G+ output enables connection to a DM 8G+ receiver, the input of another DM® switcher, or an HDBaseT certified display device or receiver, using a single CAT type twisted pair cable.[1] Power over DM (PoDM) is supplied through the same connection, providing a centralized power source for PoDM compatible receivers.[2]
All outputs on the DMC-4K-CO-HD are capable of handling video resolutions up to 4K and Ultra HD. Support for 4K video also ensures support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA. DM 8G+ transports uncompressed Full HD 1080p, WUXGA, and 2K signals over distances up to 330 feet (100 m) using Crestron DM Ultra or DM 8G® Cable, or third-party CAT5e. Higher resolution signals up to UHD and 4K are supported over distances up to 330 feet (100 m) using DM Ultra Cable, 230 feet (70 m) using DM 8G Cable, or 165 feet (50 m) using CAT5e.[1]
Crestron DigitalMedia 8G+ technology is designed using HDBaseT Alliance specifications, ensuring interoperability with other HDBaseT certified products. Either DM 8G+ output can be connected directly to an HDBaseT compliant device without requiring a DM receiver.
DigitalMedia offers an alternative to conventional RS-232 and IR display control by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to a control system (via the DM switcher), the DMC-4K-CO-HD provides a gateway for controlling display devices right through their HDMI or HDBaseT connections, potentially eliminating the need for any dedicated control wires or IR emitters.
To configure a DM switcher complete with input and output cards, cables, and other peripherals, please use the online DigitalMedia Switcher Configuration Tool.
Are you upgrading an existing DM switcher that has older “multi-gang” DMCO-series output cards? Use the online Output Card Additions and Upgrades Tool to update your existing output cards and switcher to the new “single-gang” output card format.
Please refer to the DigitalMedia Resources Webpage at http://www.crestron.com/dmresources/ for additional design tools and reference documents.
Key Features
- Modular output card for a DM-MD8X8, DM-MD16X16, or DM-MD32X32 switcher
- Provides two independent 4K DM 8G+® outputs
- HDBaseT® Certified — Enables direct connection to other HDBaseT certified equipment
- Includes a parallel HDMI® port on the first output
- Handles video resolutions up to 4K and Ultra HD
- Handles 3D video and Deep Color
- Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
- HDCP 1.1 compliant
- Supports cable lengths up to 330 ft (100 m) for all resolutions up to UHD and 4K using DM® Ultra cable [1]
- Supports cable lengths up to 330 ft (100 m) for 1080p, WUXGA, and 2K using DM 8G® cable or CAT5e [1]
- Supports cable lengths up to 230 ft (70 m) for UHD and 4K using DM 8G cable, or 165 ft (50 m) using CAT5e [1]
- Enables HDMI and HDBaseT device control via CEC
- Supports PoDM and PoH [2]
- Occupies a single output card slot
| Maximum Cable Lengths |
| |
|
Cable Type: |
| |
Resolution: |
DM-CBL-ULTRA
DigitalMedia™ Ultra Cable |
DM-CBL-8G
DigitalMedia 8G™ Cable |
CAT5e (or better)
UTP or STP [1] |
| |
1080p60 Full HD |
330 ft (100 m) |
330 ft (100 m) |
330 ft (100 m) |
| |
1920x1200 WUXGA |
| |
1600x1200 UXGA |
| |
2048x1080 2K DCI |
| |
2560x1440 WQHD |
230 ft (70 m) |
165 ft (50 m) |
| |
2560x1600 WQXGA |
| |
3840x2160 Ultra HD |
| |
4096x2160 4K DCI |
| Video |
| Output Signal Types |
DM 8G+® & HDBaseT® w/Deep Color, 3D, & 4K; HDMI® w/Deep Color, 3D, & 4K (DVI compatible [3]) |
| Maximum Resolutions |
| Scan Type |
Resolution |
Frame Rate |
Color Sampling |
Color Depth |
| Progressive |
4096x2160 4K DCI
&
3840x2160 Ultra HD |
24 Hz |
4:4:4 |
30 bit |
| 30 Hz |
4:4:4 |
24 bit |
| 30 Hz |
4:2:2 |
36 bit |
| 60 Hz |
4:2:0 |
24 bit |
| 2560x1600 WQXGA |
60 Hz |
4:4:4 |
36 bit |
| 1920x1080 HD 1080p |
60 Hz |
4:4:4 |
36 bit |
| Interlaced |
1920x1080 HD 1080i |
30 Hz |
4:4:4 |
36 bit |
|
NOTE: Custom resolutions may be supported at pixel clock rates up to 600 MHz*.
*Due to DSC codec limitations, only 4K60 and 4K50 resolutions can be supported at pixel clock rates between 300-600MHz. For detailed information, refer to Online Help Answer ID 1001200.
|
| Audio |
| |
Output Signal Types |
DM 8G+, HDBaseT, HDMI |
| |
Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels |
| Communications |
| |
DigitalMedia |
DM 8G+, HDCP 1.1, EDID, CEC, PoDM, PoDM+, Ethernet |
| |
HDBaseT |
HDCP 1.1, EDID, CEC, RS-232, PoH, Ethernet |
| |
HDMI |
HDCP 1.1, EDID, CEC |
| |
NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI and HDBaseT devices and a control system |
| Connectors |
| |
DM OUT |
(2) 8-pin RJ45 female, shielded, comprising (2) DM 8G+ outputs (HDBaseT compliant);
PoDM and PoH PSE (Power Sourcing Equipment) ports[2];
Each connects to the DM 8G+ input of a DM receiver or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1] |
| |
POE IN |
(2) 8-pin RJ45 female comprising (2) PoE inputs;
Each connects to one port of a DM-PSU-8 or DM-PSU-16 PoDM Power Supply, or 802.3af or 802.3at compliant PoE PSE (Power Sourcing Equipment), to enable PoDM and PoH power sourcing via the corresponding DM 8G+ output [2] |
| |
HDMI |
(1) 19-pin Type A HDMI, female;
HDMI digital video/audio output, DVI compatible [3];
Outputs same signal as the left DM 8G+ output |
| Indicators |
| |
DM OUT |
(4) LEDs, green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence, for each corresponding DM 8G+ output |
| Construction |
| |
Plug-in card, occupies (1) DM switcher output card slot, includes metal faceplate w/black finish |
| Weight |
| |
6.2 oz (176 g) |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.