| Video |
| Switcher |
4x2 manual switching, audio-follows-video, Crestron Auto-Locking® and QuickSwitch HD™ technologies |
| Input Signal Type |
HDMI with Deep Color, 3D and 4K (DVI and Dual-Mode DisplayPort™ interface compatible3) |
| Output Signal Types |
HDMI and DM Lite with Deep Color, 3D and 4K60 4:2:0 support1, 2 (DVI compatible3) |
| Copy Protection |
HDCP 2.2 |
Maximum Resolutions
Scan
Type |
Resolution |
Frame
Rate |
Color
Sampling |
Color
Depth |
| Progressive |
4096x2160 DCI 4K
&
3840x2160 4K UHD |
24 Hz |
4:4:4 |
30 bit |
| 30 Hz |
4:4:4 |
24 bit |
| 30 Hz |
4:2:2 |
36 bit |
| 60 Hz |
4:2:0 |
24 bit |
| 2560x1600 WQXGA |
60 Hz |
4:4:4 |
36 bit |
| 1920x1080 HD 1080p |
60 Hz |
4:4:4 |
36 bit |
|
NOTES:
- Custom resolutions are supported at pixel clock rates up to 300 MHz.
- Interlaced video sources are not supported.
|
| Audio - General |
| Digital-to-Analog Conversion |
24-bit 48 kHz |
| Frequency Response |
±0.5 dB, 20 Hz to 20 kHz |
| THD+N |
<0.005%, 1 kHz, 10 dBV |
| S/N Ratio |
>95 dB, 10 dBV, 20 Hz to 20 KHz, A-weighted |
| Crosstalk |
≤90 dB, 1 KHz, for multiple inputs only |
| Stereo Separation |
≤80 dB, 20 Hz to 20 kHz |
| Audio - Source Inputs |
| Input Signal Type |
HDMI (Dual-Mode DisplayPort interface compatible3) |
| Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels |
| Audio - Digital Output |
| Output Signal Type |
HDMI |
| Formats |
Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels |
| Source |
-80 dB to +20 dB adjustment range plus Mute |
| Master Volume |
-80 dB to +20 dB adjustment range plus Mute |
| Audio - Analog Line Output |
| Output Signal Type/Format |
Stereo 2-channel |
| Volume Control |
-80 dB to +20 dB adjustment range plus Mute |
| Communications |
| Ethernet |
100 Mbps, auto-negotiating, auto-discovery, full/half duplex, DHCP, web browser setup and control, Crestron control system integration |
| DM Lite |
HDCP 2.2 and EDID |
| USB |
To power a USB powered device |
| HDMI |
HDCP 2.2 and EDID |
| Connectors |
| HDMI INPUT 1-4 |
(4) 19-pin Type A connector, female;
HDMI digital video/audio inputs (DVI and Dual-Mode DisplayPort interface compatible3) |
| HDMI 1 OUTPUT |
(1) 19-pin Type A connector, female;
HDMI digital video/audio output (DVI compatible3);
Mirrored with DM LITE 1 output |
| DM LITE 1 OUTPUT |
(1) Yellow 8-pin RJ-45 connector, female, shielded;
DM Lite output port for connection to a DM Lite receiver4;
Mirrored with HDMI 1 output |
| DM LITE 2 OUTPUT |
(1) Yellow 8-pin RJ-45 connector, female, shielded;
DM Lite output port for connection to a DM Lite receiver4 |
| AUX |
(1) 3-pin 3.5 mm detachable terminal block;
Unbalanced stereo line-level audio output;
Output Impedance: <100 Ohms;
Maximum Output Level: 2 Vrms unbalanced |
| COM |
(1) 3-pin 3.5 mm detachable terminal block;
RS-232 port, for TX only;
Supports RS-232 up to 115.2k baud with hardware and software handshaking; |
| NOTE: The COM port provides power On/Off control of the display device without a control system, or fully programmable control of any device with a control system. |
| Ethernet |
(1) 8-pin RJ-45 connector, female;
100BASE-TX Ethernet port |
| 24V 2.5A |
(1) 2.1 x 9.5 mm DC power connector;
24VDC power input;
PW-2420RU power pack (included) |
| SERVICE |
(1) USB Type A female;
Provide up to 5V 500mA power to USB powered device |
| Controls and Indicators |
| INPUT 1-4 |
(4) Push buttons for manual input selection and (4) LEDs. Green indicates that the corresponding input is routed to an output. Amber indicates that a source is detected at the corresponding input but is not routed to an output. |
| OUTPUT 1-2 |
(2) Push buttons for manual output selection and (2) LEDs. Green indicates that a display or other destination device is detected and the corresponding output is transmitting video. Amber indicates that a display or other destination device is detected but no video is routed to the corresponding output. |
| SETUP |
(1) Red LED and (1) push button for display of IP address on connected HDMI and DM Lite outputs |
| Ethernet |
(2) LEDs on RJ-45 connector; Green indicates that a 100BASE-TX link is established. Flashing amber indicates Ethernet activity. |
| DM LITE 1-2 |
(2) LEDs on RJ-45 connector; Green indicates that a DM Lite link is established. Flashing amber indicates non-HDCP video. Solid amber indicates HDCP video. |
| PWR |
(1) LED. Amber indicates that the device is booting. Green indicates that the device is operational. |
| Power |
| Power Pack (Included) |
2.5A @ 24VDC; 100-240VAC, 50/60 Hz;
Model: PW-2420RU |
| NOTE: This power connection powers the HD-MD402 and all devices connected to the DM Lite output ports. Power should not be connected to the HD-MD402 and DM Lite receivers simultaneously. |
| Power Consumption |
26 W typical |
| Environmental |
| Temperature |
32° to 104°F (0° to 40°C) |
| Humidity |
10% to 90% RH (non-condensing) |
| Heat Dissipation |
89 BTU/hr typical |
| Acoustic Noise |
Not applicable (fanless) |
| Construction |
| Chassis |
Metal, black finish, vented top and bottom |
| Mounting |
Surface-mountable |
| Dimensions |
| Height |
1.72 in. (44 mm) |
| Width |
8.66 in. (220 mm) |
| Depth |
6.25 in. (159 mm) |
| Weight |
| 2.9 lb (1.15 kg) |
| Compliance |
| CE, IC, FCC Part 15 Class B digital device |
| Regulatory Model |
M202028001 |