Video |
Input Signal Type |
HDMI with Deep Color, 3D, and 4K (DVI and Dual-Mode DisplayPortTM interface compatible3) |
Copy Protection |
HDCP 2.2 |
Maximum Resolutions
Scan
Type |
Resolution |
Frame
Rate |
Color
Sampling |
Color
Depth |
Progressive |
4096x2160 DCI 4K
&
3840x2160 4K UHD |
24 Hz |
4:4:4 |
30 bit |
30 Hz |
4:4:4 |
24 bit |
30 Hz |
4:2:2 |
36 bit |
60 Hz |
4:2:0 |
24 bit |
2560x1600 WQXGA |
60 Hz |
4:4:4 |
36 bit |
1920x1080 HD 1080p |
60 Hz |
4:4:4 |
36 bit |
Interlaced |
1920x1080 HD 1080i |
30 Hz |
4:4:4 |
36 bit |
|
NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz. |
Audio |
Input Signal Type |
HDMI (Dual-Mode DisplayPort interface compatible3) |
Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels |
Communications |
HDMI |
HDCP 2.2, EDID, CEC pass-through |
DM Lite Link |
Proprietary link for connection between one DM Lite transmitter and receiver only |
Connectors |
HDMI IN |
(1) HDMI Type A connector, female;
HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible3) |
POWER ONLY |
(1) USB Type A connector, female;
USB power port (500 mA maximum output);
Supplies power to USB powered device |
TO RX (DM Lite, Rear) |
(1) 8-pin RJ-45 connector, female, shielded;
DM Lite link port for connection to a DM Lite or DMPS Lite receiver1 |
24VDC 1.25A (Rear) |
(1) 2-pin 3.5 mm detachable terminal block;
24 VDC power input;
NOTE: A power pack is not included with the HD-TX-101-C-1G-E. When the HD-TX-101-C-1G-E is paired with a surface-mountable receiver, the 24 VDC power input of the HD-TX-101-C-1G-E is not used. The power pack included with and connected to the surface-mountable receiver is used to power both the receiver and the HD-TX-101-C-1G-E.2 |
Indicators |
PWR |
(1) Green LED, indicates operating power is supplied from the receiver via the DM Lite link or from a power pack via the 24 VDC input |
HDMI IN |
(1) Green LED, indicates HDMI input signal presence |
TO RX (DM Lite) |
(2) LEDs on RJ-45 connector, green LED indicates DM Lite link status, amber LED indicates a valid video signal |
Power |
Power Pack (sold separately) |
Input: 100-240 VAC, 50/60 Hz;
Output: 1.25 Amps @ 24 VDC;
Model: TBA |
NOTE: This power pack is required only when the HD-TX-101-C-1G-E is paired with a wall plate receiver. When the HD-TX-101-C-1G-E is paired with a surface-mountable receiver, the power pack included with and connected to the receiver is used to power both the receiver and the HD-TX-101-C-1G-E.2 |
Environmental |
Temperature |
32° to 104° F (0° to 40° C) |
Humidity |
20% to 90% RH (non-condensing) |
Heat Dissipation |
8.7 BTU/hr |
Construction |
Composition |
Metal housing and bracket with black or white polycarbonate front label overlay |
Mounting |
Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included) |
Faceplate |
Requires a decorator-style faceplate (FP-G series, sold separately) |
Dimensions |
Height |
4.08 in (104 mm) |
Width |
1.81 in (46 mm) |
Depth |
1.97 in (50 mm) |
Weight |
5.30 oz (150 g) |
Compliance |
UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device |
Regulatory Models |
HD-TX-101-C-1G-E-B-T, HD-TX-101-C-1G-E-W-T |
Maximum DM Lite Link Cable Lengths |
Resolution |
Cable Type |
CAT5e (or higher),
DM-CBL-ULTRA DM® Ultra Cable, or
DM-CBL-8G DM 8G DM 8G® Cable1 |
1920x1080 FHD 1080p |
230 ft (70 m) |
1920x1200 WUXGA |
1600x1200 UXGA |
2048x1080 DCI 2K |
2048x1152 QWXGA |
2560x1080 UWFHD |
130 ft (40 m) |
2560x1440 WQHD |
2560x1600 WQXGA |
3840x2160 4K UHD |
4096x2160 DCI 4K |
|